Fujitsu ETERNUS DX60 S3 - Chapter 4 Hardware Configurations; Controller Enclosure; Figure 4.1 Front View of a 2.5 Type Controller Enclosure

Chapter 4
Hardware Configurations
This chapter explains hardware configurations for the ETERNUS DX.
4.1 Controller Enclosure
This section explains the main components in the controller enclosure.
The controller enclosure contains drives installed in the front, and controllers and power supply units in the
rear.
Two types of controller enclosures are available; a 2.5" type and a 3.5" type.
■
External Views of a 2.5" Type Controller Enclosure
● Front View
Figure 4.1 Front View of a 2.5" Type Controller Enclosure
1
1. 2.5" disk
49
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0