183
8.1 Scanner Settings
8
SCANNER SETTINGS
Alarm setting
“Section 8.22”
For the beeper to sound the alarm of a paper
jam or multifeed, select Alarm at error.
Disable alarm/Enable alarm Disable alarm
Jam detection
outside of scan-
nable area when
transporting...
“Section 8.23”
By selecting “Enable”, such a case in which
the document is fed outside the scannable
area due to abnormal skew can be judged as
a paper jam.
Enable/Disable Disable
Imprinter Selec-
tion
“Section 8.24”
Select the Pre-imprinter option or the Post-
imprinter option if you have installed the
options (to be purchased separately).
Normal (obey Host specifica-
tion)/Forcibly select Pre-
imprinter/Forcibly select Post-
imprinter
Normal
Timeout for man-
ual feeding
“Section 8.25”
Specify the standby time period. After the
predetermined time period has elapsed,
manual feeding mode is canceled.
5, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 110 ,120, 180, 240,
300, 360, 420, 480, 540, 600,
900, 1200, 1800, 1999
(seconds)
10 seconds
Scan Setting for
Document with
Tab
“Section 8.26”
When the document has tab on the bottom
edge of the image, the tab image remains
even if the document is scanned with Auto-
matic paper size detection. When “Tab-
attached document” is specified, the tab
image remains in the scanned data but the
scanning speed may be rather slow.
Document with tab/Document
without tab
Document
without tab
Paper stop posi-
tion at multifeed
error
“Section 8.27”
When a multifeed error is detected by over-
lapping of documents, the position to stop
the documents on which the multifeed
occurred can be selected.
Normal / Paper output slot Normal
Overscan Control
“Section 8.28”
Specify the optimal amount of black mar-
gins for overscan.
Normal / Optimize Normal
Pause scanning
“Section 8.29”
Specify whether or not to suspend scan
operation with the [Send to] button while
documents are being scanned.
Enable / Disable Disable
Item Explanation Selectable parameter Default
To Next Page
Loading...
