Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
125
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
The Software Operation Panel (SOP) is installed together with
the scanner drivers (TWAIN/ISIS).
This application allows you to configure various settings such
as the operation of the scanner and managing the
consumables.
1 Confirm that the scanner is connected to your computer,
then power on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 18).
2 Select the [Start] menu J [All Programs] J [Scanner
Utility for Microsoft Windows] J [Software Operation
Panel].
D The [FUJITSU Software Operation Panel] dialog box appears.
9.1 Starting Up the Software Operation Panel
z Do not use the operator panel while the Software Operation
Panel is running.
z If you connect multiple scanners, the second scanner and
so forth will not be recognized. Connect only one scanner at
a time.
To Next Page
Loading...
