Fujitsu fi-6110 - Setting up the ADF Paper Chute; Replacing the

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
20
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Documents loaded in the ADF paper chute are fed into the
scanner one by one.
Using the chute extension 1 and chute extension 2 as shown
below will keep the documents straight and feed them
smoothly.
1 Pull out chute extension 1.
2 Pull out chute extension 2.
1.5 Setting Up the ADF Paper Chute
Make sure to hold the scanner while you pull out the chute
extension 1.
Chute Extension 1
Make sure to hold the scanner while you pull out the chute
extension 2.
Chute Extension 2