How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
60
How to Load
Documents
Scanner
Overview
Indicates that a device
error (alarm) occurred
during initialization or
scanning.
Error codes beginning with
the letter "E", "F", "C", "H",
"A" or "L" are displayed.
For more details about the
errors, refer to "Device
Errors" (page 128).
When this alarm occurs,
turn the power off then
back on. If the problem still
persists, contact your
FUJITSU scanner dealer or
an authorized FUJITSU
scanner service provider.
When the scanner has not
been in operation for the
set sleep interval, it enters
power saving mode.
Press any button on the
operator panel to return to
the previous screen.
Display Description
To Next Page
Loading...
