Fujitsu FI-7600 - Page 61

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
61
How to Load
Documents
Scanner
Overview
Indicator
iMFF Setting
Displays the iMFF setting as follows:
In Manual mode, is displayed at all times.
In Auto mode 1 and Auto mode 2, the number of multifeed patterns memorized (max. of 8 patterns) is displayed.
For details, refer to "3.2 Settings Menu" (page 62).
Icon Mode
Manual
mode
Auto mode 1
Auto mode 2
Application Number
Displays the number for the application that you want to launch when you press the [Scan/Enter] button while the [Ready]
screen is displayed.
For details, refer to "3.3 Function Selection" (page 80).
Information
flashes when there is a message for replacing consumables/cleaning/glass cleaning/regular maintenance.
[Consumables], [Cleaning], [Clean glass!], or [maintenance] also flashes on the second line in the [Ready] screen.
For information regarding appropriate actions to take when "3.2 Settings Menu" (page 62) flashes, refer to .
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For details, refer to "3.2 Settings Menu" (page 62).