How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
76
How to Load
Documents
Scanner
Overview
15: Pick pressure Set the pick pressure for feeding paper.
This setting can also be configured from the
Software Operation Panel.
1: Weak
2: Normal
3: Strong
2: Normal
16: Manual/
Continuous Feed
Setting
Select whether to enable or disable the continuous
feed mode.
This setting can also be configured from the
Software Operation Panel.
1: Enable
2: Disable
2: Disable
17: Manual Feed
Timeout
Specify the waiting time for the scanner to cancel
manual feeding.
This setting can also be configured from the
Software Operation Panel.
510, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 180, 240,
300, 360, 420, 480, 540, 600, 900, 1200, 1500, 1800, 1999
(seconds)
10
Item Description Parameter (*1)/Value Factory
Default
(*2)
-: No parameters/values
To Next Page
Loading...
