Appendix
Troubleshooting the WLAN
Causes and countermeasures for troubles you may encounter while using your
wireless LAN are described in the following table.
Problem Possible Cause Possible So lution
Incorrect netwo rk name (SSID)
or network key
Ad hoc connection: verify that
the network names (SSID’s)
and netw ork keys (W EP) of
all c ompu ters to be connected
have been configured correctly.
SSID’s an d WEP key values
must b e identical o n each
machine.
Access Po int (Infrastructure)
connection: set the network
name (SSID) and network key
to the same values a s those of
the access point.
Set the Network Authentication
value identica lly to that of the
Access Point. Please consult
your network administrator for
this value, if necessary.
Unavailable network connection
Weak received signa l strength
and/or link quality
Ad hoc connection: Retry
connection after shortening
the distance to the destination
computer or removing any
obstacles for better s ight.
Access Po int (Infrastructure)
connection: Retry connection
after shortening the distance to
the access point or removing
any obstacles for better sight.
Fujitsu 105
To Next Page
Loading...
