Connecting external devices
Connecting external devices
Under all circumstance s, please observe the safety notes provided in the
"
Important notes", Page 12 chapter before connecting or disconnecting
any devices to or from your notebook.
Always read the documenta tion s upplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the ste ps in the sequence below when conn ecting or disconnecting
devices to your notebook:
With some devices su ch as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of th e external devices require s pecial drivers (see the operating
system and external device documentation).
Connecting devices to the noteboo k
1. Switch the notebook and all external devices o ff.
2. Unplug the A C p
lug of the notebook and all affected devices from the power outlets.
3. Connect the cables for all the external devices according to the instruct ions.
4. Plug all the A
C plugs into the power outlets.
Devices,Peripherals,
Disconnecting devices from th e notebook
1. Switch off the notebook and all external devices.
2. Unplug the
AC plug of the notebook and all affected devices from the power outlets.
3. Disconnect the cables for all the external devices following the instructions.
Devices,Peripherals,
72 Fujitsu