Troubleshooting and tips
The notebook stops working
NotebookEnding
Cause Troublesh ooting
The notebook is in energy savin
g mode.
► End energy saving mode.
An application program has ca
used the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or sw itching the device off and back
on again).
The battery is discha rged.
► Charge the battery.
or
► Insert a c harged battery.
or
► Connect the AC adapter t
o the notebook.
The printer does not print
Printerdoe s notp
rint
Cause Troublesh ooting
The printer is not switched on. ► M ake sure that the printer is switch ed
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
► Check t hat the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is th e wrong printer d river.
► Check t hat the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe
r th e correct printer driver is
loaded (refe
r to the printer documentation).
The wireless connection to a network does not w ork
Thewirel
essconnecti ontoan etworkdoes notwork
Cause Troublesh ooting
The w ireless component is switched off. ► Switch the wireless component on (see
"
Switch ing t he wireless component s on and
off", Page 55).
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
enabled by the software.
► Furthe
r information o n using the wireless
compon
ent can be found in the help files.
Fujitsu 85
To Next Page
Loading...
