Working with the no tebook
Using the energy saving functions
EnergyEnergyBattery
The noteb ook uses less power when the available energy-saving function s are used. You will
then be able to work longer when using th e battery before having to recharge it.
The energy efficiency is increased an d environmental pollution is reduced.
By choosing the best power options, yo u c an make signi ficant savings and
at the same time help protect the environment.
When you fold down and close the LCD screen, depending on the setting in W indows,
the notebook automatically enters a power saving mode.
► Set t he energy saving functions in your Control Panel.
► Set the screen saver in your Control Panel.
or
► Right-click on the desktop. Activate the screen saver by clicking on Personalize – Change
Screen Saver.
If you need further information about an option, you can get help with most
settings by pressing
F1
to open the Microsoft Help.
When the notebook is in energy saving mode, the fo llow in g must be rememb ered:
During energy sa ving mode , open data is h eld in main memory or
in a swap file on the hard disk.
Never switch the notebook off while it is in an e nergy saving mode . If the built-in battery
is nearly flat, close all open files and do not go into energy saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit energy saving mode if necessary by moving the mouse, making an en try at the keyboard
or by switching on the notebook.
► Close all opened programs and completely shut down the notebook.
52 Fujitsu
To Next Page
Loading...
