Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated . ► Calibrate the stylus as shown under
Hard ware and Sound / Tablet PC Settin gs
in the Control Panel, s ee "
Adjusting the
stylus", Page 37 and "Cali brating the stylus",
Page 37.
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install th e driver
for the standard m odel.
or
► If your device is one which can be
operated using the s tylus and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook d
oes n ot start after switching it on
Notebook
Cause Troubleshooti
ng
The battery is
not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The ba ttery is discharged.
► Charge the battery.
or
► Insert a c harge d battery.
or
► Connect the AC adapter to the not ebook.
The AC adapter is not properly connected. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
84 Fujitsu
To Next Page
Loading...
