Fujitsu LIFEBOOK T904 - Brief overview of the security functions

Security functions
Brief overview of the security functions
Detailed information about the security equipment of your device can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/D V D
or on our website at "
http://www.fujitsu.com/us/support/".
Security function Type of protection
Preparation
Security Lock
Mechanical Fit and lock the Kensingto
n
Lock Cable (accessory).
Fingerprint sensor (device
dependent)
Biometric
Install the supplied fingerprint
software.
BIOS password p rotection Password protection for
the BIOS Setup, operating
system and ha rd disk with
supervisor and user password.
The passwords consist of a
maximum of eight alphanumeric
characters.
Specify at least one supervisor
password in the BIOS Setup
and act ivate the password
protection for the operating
system and hard disk as
desired.
Boot from R emovab
le Media
Prevents unauthorized boo ting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive, etc.).
In the BIOS Setup,
go to the
Securit y menu and
edit the Boot
from Removable M
edia option.
Owner Infor ma
tion
Display service desk or owner
information during the boot
process.
In the B IO S Set
up, go to the
Securit y menu
and e dit the
Owner Inform
ation option.
SmartCard reader (device
dependent)
PIN and Sm artCa rd protection
for th e operating system
To use the SmartCard reader
functions, install the supplied
(or other suitable) software.
Trusted Platform Module
(device dependent)
Identification and authentication
of the notebook
Define a superviso r password
in the BIOS Setup and enable
the TPM (Security Chip).
64 Fujitsu