Working with the notebook
Using the device as a n otebook
Clickpad and Clickpad buttons
Keep the Clickpad clean. Protect it from dirt, liquids, and grease.
ClickpadClickpad
Do not use the Clickpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the Clickpad or the Clickpad buttons.
1
2
1 = Clickpad
2 = Clickpad buttons
The Clickpad enables you to move the mouse pointer on the screen.
The Clickpad buttons allow the selection and execution of commands. They
correspond to the buttons on a conventional mouse.
You ca n also deactivate the Clickpad via a keyboard shortcut, so that you cannot move
the pointer on the s creen unintentionally (see chapter "
Key combinations", Page 44).
Moving the pointer
► Move your fing
er on the C lickpad .
Clickpad
The pointer will move.
Selecting a
nitem
► Move the pointer to the item you wish to select.
Clickpa
d
► Tap the Cli
ckpad once or press the left button once.
The item is selected.
Executi
ng commands
► M ov e the pointer to the field you wish to select.
Clickpad
► Ta p t h e
Clickpad twice or press the left button twice.
The command is executed.
Fujitsu 39
To Next Page
Loading...
