Fujitsu LIFEBOOK T904 - Connecting the Notebook to the Port Replicator

Working with the no tebook
Connecting the notebook to the port replicator
► Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.
3
4
5
1
2
2
► Place t he notebook on the port replicator so that the connector on the underside of
the notebook aligns with the connector on the Port Replicator (1).
► Press do
wn on the n otebook’s rear corne rs so that it locks into position (2).
► Connect the AC adapter cab le to the DC jack (DC IN) of the Port Replicator (3).
► Connec
t the AC cable to the AC adapter (4).
► Plug the A C cable into the power outlet (5).
60 Fujitsu