First-time se tup of yo ur d evice
First-time setup of your devic
e
First- time setu pGettingstarted
Please read th e c hapter "Imp ortant no tes", Page 12.
If your device is equipped with a W indows operating s ystem, the necessary
hardware drivers and supplied software are already pre-installed.
Before switching it on for the first time, connect the device to the A C voltage using
the AC adapter, see "
Connecting the AC adapter", Page 18. The AC adapter must
remain connected during t he whole of the installation process.
A system test is performed when your device is first s witche d on. Various m essages
can appear. The display m ay remain dark for a short time o r may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the fir st-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device u sing the battery.
When used on the move, the built-in battery provides the device with th e necessary po wer. You
can increase the operating time by using the available energy saving fun ctions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed to reuse the packaging in futu re, for example if you
need to tr
ansport your device.
Fujitsu 17
To Next Page
Loading...
