Fujitsu PRIMERGY RX200 S6 Service Supplement

Comments… Suggestions… Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
manuals@ts.fujitsu.com.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2010 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

Fujitsu PRIMERGY RX200 S6 Specifications

General

Tcase	77.6 °C
Bus type	QPI
Stepping	B1
FSB Parity	No
Processor code	SLBV4
Processor cache	12 MB
Processor cores	4
Processor model	E5620
System bus rate	5.86 GT/s
Processor series	Intel Xeon 5600 Series
Processor socket	Socket B (LGA 1366)
Processor threads	8
Processor codename	Westmere EP
Motherboard chipset	Intel® 5500
Number of QPI links	2
Processor frequency	2.4 GHz
Processor cache type	Smart Cache
Processor lithography	32 nm
Processor manufacturer	Intel
Processor package size	42.5 X 45 mm
Processor front side bus	- MHz
Processor boost frequency	2.66 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Supported instruction sets	SSE4.2
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	18
Physical Address Extension (PAE)	40 bit
Memory types supported by processor	DDR3 800/1066
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	25.6 GB/s
Maximum internal memory supported by processor	288 GB
HDD size	2.5 \
RAID levels	1, 5, 6
HDD capacity	146 GB
HDD interface	Serial Attached SCSI (SAS)
Optical drive type	-
Total storage capacity	292 GB
Memory slots	12
Internal memory	4 GB
Memory clock speed	1066 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	192 GB
Maximum graphics card memory	32 MB
LAN controller	Intel® 82575EB
USB 2.0 ports quantity	7
Ethernet LAN (RJ-45) ports	3
Drive bays	8 x 2.5 \
Size (imperial)	19 \
Dimensions (WxDxH)	482.6 x 765 x 43 mm
Motherboard manufacturer	D 3031
Recommended humidity operating range	10 - 85 %
Recommended operating temperature range (T-T)	10 - 35 °C
Power supply type	47 - 63 Hz
Power requirements	100 - 127 V / 200 - 240 V
Power consumption (typical)	770 W
Power supply input frequency	50 Hz
Compatible operating systems	Microsoft Windows Server 2008 Microsoft Windows Server 2008 R2 (Hyper-V) Under Hyper-V are (et al): - Windows Server 2008 R2 - Windows Server 2008 - Windows Server 2003 - Windows Server 2000 Microsoft Windows Server 2003 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Citrix XenServer VMware Infrastructure VMware vSphere 4.0
Management platform	iRMC S2
Chassis type	Rack (1U)
Certification	ISO 7779; ISO 9296
Processor ARK ID	47925
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Weight	17000 g