Fujitsu PRIMERGY TX200 S6 Options Guide

90 Options Guide TX200 S6
Further options
Figure 69: UFM - Position on the system board
Figure 70: Connecting the UFM to the system board
Ê Connect the USB Flash Module to the system board. The spacer must click
into the hole on the system board.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 107.

Fujitsu PRIMERGY TX200 S6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S6
Category	Server
Language	English