TX200 S6 Options Guide 89
Further options
Ê Reinstall system fan 2 (or 2&4) as described in the section "Installing system
fan 2 (or 2&4)" on page 108.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 107.
I You can find information on configuring the TPM in the "D2799 BIOS
Setup Utility for TX200 S6" manual.
9.2 USB Flash Module (UFM)
The server can be equipped with a USB Flash Module (UFM).
Figure 68: UFM installation kit
Ê Open the server as described in the chapter "Preparation" on page 27.
1 USB Flash Module (UFM) 3 UFM spacer
2 UFM nylon screw
0
1
2
To Next Page
Loading...
