Fujitsu S1100 - Page 303

Actions (for Mac OS users)
303
3. Change the settings for [Scan to E-mail] (If you do not want to change
any settings, go to step 4.).
1. Click the [Application Setting] button.
DThe [Scan to E-mail - Options] window appears.
2. Change the settings.
For details about the [Scan to E-mail - Options] window, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to E-mail - Options] window.
4. Click the [Apply] button in the ScanSnap setup window.
5. Click the [ ] button in the upper left corner to close the ScanSnap
setup window.