What to do if Fujitsu ScanSnap fi-5110EOX Scanner double-feed frequently occurs?
If double-feeding occurs frequently with your Fujitsu Scanner, clean the Pad ASSY following the instructions in “5.3. Cleaning Inside of the scanner.” If the problem persists, replace the Pad ASSY following the instructions in “6.2. Replacing the Pad ASSY.” Also, reduce the number of sheets in the document stack to 5 mm thickness or less.
Why is my Fujitsu ScanSnap fi-5110EOX Scanner scanning so slow?
If your Fujitsu Scanner's scanning speed is slow, first check if your computer meets the system requirements in section 2.1, “Before Installing”, of the Operator’s Manual. If not, uncheck "Allow automatic image deskew" and "Allow automatic image rotation" under [Scanning] - [Option...] in the "Scan and Save Settings" window to improve speed. Also, connect the scanner to a USB 2.0 port on your PC (and ensure any USB hub also supports USB 2.0).
How to fix Fujitsu Scanner if it cannot be turned on?
If your Fujitsu Scanner won't turn on, check that the AC/USB cable and AC adapter are correctly connected. Try disconnecting and reconnecting them. Ensure the Paper chute cover is open. Wait for Windows to fully start, as the LED might turn off during startup or in low power mode. Finally, press the [POWER] button on the scanner.
What to do if scanning does not start on my Fujitsu ScanSnap fi-5110EOX Scanner?
If scanning doesn't start on your Fujitsu Scanner, ensure the USB cable is correctly connected, especially if using a hub (check the hub's power). If the "ScanSnap Manager" icon isn't visible, start it from the [Start] menu under [Programs] - [ScanSnap Manager]. You can also try disconnecting and reconnecting the AC cable and adapter. If using a USB hub, connect the scanner directly to your PC. Restarting your PC or reinstalling ScanSnap Manager may also help. Ensure that the "Scan and Save Settings" window is closed before scanning.
What to do if my Fujitsu ScanSnap fi-5110EOX is not turning on?
If your Fujitsu Scanner is not turning on, ensure the AC/USB cable and AC adapter are correctly connected. Try disconnecting and reconnecting them. Also, make sure the Paper chute cover is open, that Windows has completely started up, and that you have pressed the [POWER] button on the scanner.
Regulatory compliance statement for radio frequency emissions.
Radio noise emissions compliance for Canadian digital apparatus.
Explains warning symbols for safe operation and hazard prevention.
Covers AC cable safety, wet hands, and physical handling precautions.
Details risks like liquids, internal components, and environmental factors.
Outlines precautions for stable surfaces, ventilation, and power.
Advises against static electricity, sprays, sunlight, and temperature changes.
Verifies all necessary parts are included in the scanner package.
Identifies and explains the purpose of each scanner component.
Guides through the process of installing ScanSnap software and drivers.
Provides steps for physically connecting the scanner to a computer.
Outlines the sequence from scanning to saving images.
Summarizes supported document media and sizes.
Provides instructions on how to properly load documents into the scanner.
Covers configuration of scanning parameters via ScanSnap Manager.
Describes specific scanning scenarios and image editing.
Guides on scanning and managing business cards with CardMinder.
Enables and uses the PDF thumbnail view feature in Explorer.
Step-by-step guide to remove ScanSnap software from the system.
Instructions for safely removing jammed documents from the scanner.
A guide to diagnose and resolve common scanner issues.
Lists recommended materials for cleaning the scanner.
Provides instructions for cleaning the scanner's outer surfaces.
Details the procedure for cleaning internal scanner components.
Information on consumable parts and their replacement cycles.
Step-by-step guide for replacing the Pad ASSY.
Detailed instructions for replacing the Pick Roller.
To Next Page
General