Actions (for Windows Users)
125
Using the Quick Menu
1. Load a document in the ScanSnap.
For details about how to load documents, refer to "How to Load Documents" (page 32).
2. Press the [Scan] button on the ScanSnap to start a scan.
D The Quick Menu appears when the scanning is completed.
3. Change the settings for [Scan to Print] (If you do not want to change any
settings, go to step 4.).
1. Move the mouse cursor to the mark on the [Scan to Print] icon, and then select
the [Settings] menu.
D The [Scan to Print - Options] dialog box appears.
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap
setup dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Using the Quick
Menu" (page 73).
To Next Page
Loading...
