Fujitsu ScanSnap S1500M User Manual

Part Numbers and Replacement Cycle of Consumables
431
Part Numbers and Replacement Cycle of
Consumables
The following table shows the part numbers of the consumables and the suggested
replacement cycles.
Note that the suggested replacement cycles are guidelines for using A4 (80 g/m² [20 lb])
wood-free paper, as these cycles vary depending on the type of documents scanned.
Only use the specified consumables.
To purchase the consumables, contact your FUJITSU dealer or an authorized FUJITSU
scanner service provider.
No. Name Part No. Suggested replacement cycle
1 PAD ASSY PA03586-0002 50,000 sheets or one year
2 PICK ROLLER PA03586-0001 100,000 sheets or one year

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g