Fujitsu ScanSnap S1500M User Manual

Configuring ScanSnap Manager (for Mac OS Users)
275
■ How to Configure Scan Settings
You can configure scan settings in the ScanSnap setup window depending on your intended
use. Configure the scan settings in the following procedure.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 258).
D The ScanSnap setup window appears.
2. Click the [Detail] button to switch to the detail view mode.
zUsing the Quick Menu
zWithout Using the Quick Menu
You can also open the ScanSnap setup window by pressing simultaneously the [command
( )] and [S] keys on the keyboard. This operation is only enabled when ScanSnap
Manager is active (when "ScanSnap Manager" is displayed in the menu bar).
The ScanSnap setup window retains the display status from the last time the ScanSnap
was used. For example, if it was closed in detail view mode, the window is displayed in
detail view mode next time you open it.
Outline view
Detail view
Outline view
Detail view

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g