How to Perform a Scan (for Mac OS Users)
267
■ Without Using the Quick Menu
The following explains the procedure for scanning without using the Quick Menu.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 258).
D The ScanSnap setup window appears.
2. Clear the [Use Quick Menu] checkbox.
3. Select a profile.
Select a profile from either of the following:
z [Profile] pop-up menu in the ScanSnap setup window
z Profile menu
To Next Page
Loading...
