Fujitsu ScanSnap S1500M User Manual

Installation Specifications
463
Installation Specifications
The following table summarizes the installation specifications of the ScanSnap.
Item Specification
Outer dimensions (Width × Depth × Height) Minimum: 292 × 159 × 158 (mm) / 11.5 × 6.3 × 6.2 (in.)
(when the ADF paper chute (cover) is closed)
Maximum: 292 × 475 × 286 (mm) / 11.2 × 9.1 × 9.4 (in.)
(when the ADF paper chute (cover) and the stacker are
open)
Weight 3.0 kg (approx. 6.62 lb)
Input power Voltage 100 V
Phase Single phase
Frequency range 50/60 Hz
Power consumption During operation: 35 W or less
During standby: 4.5 W
Temperature / humidity
allowable ranges
Temperature During operation: 5 to 35°C / 41 to 95°F
During standby: -20 to 60°C / -4 to 140°F
During storage/transportation: -20 to 60°C / -4 to 140°F
Humidity During operation: 20 to 80%
During standby: 8 to 95%
During storage/transportation: 8 to 95%
292 mm (11.5 [in]) 475 mm (18.7 [in])
286 mm
(11.3 [in])

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g