Fujitsu ScanSnap S1500M User Manual

Purchasing/Cleaning the Carrier Sheet
462
■ Cleaning the Carrier Sheet
As you keep using the Carrier Sheet, dirt and dust will accumulate on the surface and the
inside.
Clean the Carrier Sheet regularly because it may result in scanning errors.
How to perform cleaning
Gently wipe the dirt and dust off the surface and the inside of the Carrier Sheet with a cloth
moistened with Cleaner F1/mild detergent.
z Do not use paint thinner or any other organic solvents.
z Do not use force to rub against the Carrier Sheet because it may be damaged or deformed.
z Be careful not to leave any crease on the Carrier Sheet.
z After cleaning the inside of the Carrier Sheet with a cloth moistened with Cleaner F1/mild
detergent, make sure that it is completely dry before closing the Carrier Sheet.
z The Carrier Sheet should be replaced approximately every 500 scans.
For details about purchasing the Carrier Sheet, refer to "Purchasing the Carrier Sheet" (page
461).

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g