How to Perform a Scan (for Mac OS Users)
261
How to Perform a Scan
This section explains how to perform scanning with the ScanSnap.
■ Preparation
1. Turn on the computer.
D The ScanSnap Manager icon appears in the Dock when Mac OS starts up.
2. Open the ADF paper chute (cover) of the ScanSnap to turn the power on.
D The ScanSnap Manager icon changes from to .
There are two ways to perform scanning, either with the Quick Menu or without using the
Quick Menu. For details, refer to the following:
z Using the Quick Menu (→ page 262)
z Without Using the Quick Menu (→ page 267)
z If the ScanSnap Manager icon is not displayed, select [Applications] and double-
click [ScanSnap] → [ScanSnap Manager] from Finder to start up ScanSnap Manager.
z If ScanSnap Manager does not start automatically when Mac OS starts up, select
[Accounts] → [My Account] → [Login Items] → [] → [ScanSnap Manager] in the
[System Preferences] window to start up ScanSnap Manager.
There may be a slight delay before the ScanSnap Manager icon changes to depending
on your computer's performance, operating environment and load such as when multiple
programs are running at the same time.