Fujitsu ScanSnap S1500M

Using the ScanSnap in Various Ways (for Windows Users)
223
■ Deleting Blank Pages from the Scanned Image
The ScanSnap can detect and automatically delete blank pages from a scanned image.
For example, when you scan a mixed batch of double-sided and single-sided documents in
duplex mode, the images are generated without the back sides of the single-sided documents
(blank pages).
To delete blank pages, perform the following steps to change the setting.
1. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu" (page 70).
D The ScanSnap setup dialog box appears.
2. Click the [Option] button in the [Scanning] tab.
D The [Scanning mode option] dialog box appears.
z The following documents may be detected as blank.
- Almost blank documents with only a few characters
- Documents of only one color (including black) and without any patterns, lines or
characters
When you scan such documents, clear the [Allow automatic blank page removal] check box.
Also make sure to check the image data for accidentally deleted pages when discarding the
scanned document.
z Blank pages are not deleted when CardMinder is used.