Fujitsu ScanSnap S1500M User Manual

Actions (for Windows Users)
209
4. Press the [Scan] button on the ScanSnap to start a scan.
D Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
5. Click the [Close] button to close the [Scan to Mobile] dialog box when
sending of the scanned image is completed.
To enable automatic linkage with Scan to Mobile, press the [Scan] button on the ScanSnap
and start a scan while Scan to Mobile is active (where this application is currently selected
on the taskbar and the [Scan to Mobile] dialog box is brought to front).
When you select the [Wait until the [Send] button is clicked] check box in the [Scan to Mobile -
Basic] dialog box, the [Send] button appears in the [Scan to Mobile] dialog box. Click the [Send]
button to send the image to the mobile device.
The [Scan to Mobile] dialog box closes automatically when the mobile device is disconnected
from the computer.

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g