Using the ScanSnap in Various Ways (for Windows Users)
233
3. Select [one double-page spread image] in [Save as] and click the [OK]
button.
For details about the Carrier Sheet settings, refer to the ScanSnap Manager Help.
4. In the [Scanning side] drop-down list in the [Scanning] tab, select
[Duplex Scan (Double-sided)] and click the [OK] button.
If [Simplex Scan (Single-sided)] is specified for [Scanning side] in the [Scanning] tab, the
ScanSnap outputs the same result as performing a simplex scan in [two separate
images (front and back)] mode.
To Next Page
Loading...
