Fujitsu ScanSnap S1500M

Actions (for Mac OS Users)
375
4. Press the [Scan] button on the ScanSnap to start a scan.
D Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
5. Click the [Close] button to close the [Scan to Mobile] window when the
sending of the scanned image is completed.
To enable automatic linkage with Scan to Mobile, press the [Scan] button on the ScanSnap
and start a scan while Scan to Mobile is active (the Scan to Mobile menu appears on the
menu bar).
When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to
Mobile - Basic] window, the [Send] button appears in the [Scan to Mobile] window. Click
the [Send] button to send the image to the mobile device.
The [Scan to Mobile] window closes automatically when the mobile device is disconnected
from the computer.