Fujitsu ScanSnap S1500M

Using the ScanSnap in Various Ways (for Mac OS Users)
402
3. Select [one double-page spread image] in [Save as] and click the [OK]
button.
For details about the Carrier Sheet settings, refer to the ScanSnap Manager Help.
4. In the [Scanning side] pop-up menu in the [Scanning] tab, select [Duplex
Scan (Double-sided)] and click the [Apply] button.
If [Simplex Scan (Single-sided)] is specified for [Scanning side] in the [Scanning] tab, the
ScanSnap outputs the same result as performing a simplex scan in [Create front and
back images separately] mode.