Fujitsu ScanSnap S1500M User Manual

Installing in Windows
45
7. Confirm the check boxes of the software that you want to install are
selected, and click the [Next] button.
D The [Choose Destination Location] screen appears.
8. Confirm the destination folder, and then click the [Next] button.
D A confirmation about accepting the license agreement appears.
9. Read the "END-USER LICENSE AGREEMENT", select [I accept the terms
of the license agreement], and then click the [Next] button.
D The [Start Copying Files] screen appears.
10.Confirm the settings, and then click the [Next] button.
D Installation starts. When the installation is complete, the "Install Complete" screen
appears.
11.Click the [Finish] button.
z The software will not be installed unless the check box is selected.
z Note that you must install ScanSnap Manager. Also, it is recommended to install all
software in order to utilize the features of the ScanSnap.
Depending on the number of the installed software, this step may be required more than
once.

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g