Fujitsu ScanSnap S510

4.2 Changing Scanning Settings
ScanSnap S510 Operator's Guide 69
Setting the ScanSnap
4
<Setting Items>
Each setting item is described below.
Settings you can change for scanning in Quick Menu Mode differ from those in Left-Click
Menu Mode.
For your convenience, each item is marked with a following symbol:
: Items that can be set in Quick Menu Mode
: Items that can be set in Left-Click Menu Mode
* Items with no mark can be changed in both modes.
Select a profile:
You can switch between profiles configured beforehand by selecting a profile in the "Select a
profile" drop-down list.
By default, the following profiles are in the list.
• Standard
• CardMinder
• Searchable PDF
HINT
You can add profiles configured to suit your needs or preferences.
For details on how to add a profile, refer to "4.3 Saving Scanning Settings"
(page 92).