Fujitsu ScanSnap S510

4.2 Changing Scanning Settings
ScanSnap S510 Operator's Guide 77
Setting the ScanSnap
4
You can change folders to save the scanned images, or rename files in this window.
HINT
• The file is automatically named with a file name previously specified in the
"File name format" dialog box. If you do not want to rename the file, click the
[Save] button.
• When multiple files are generated per scan, each file name is followed by a
serial number. ( File name + Serial number +.Extension
)
Example 1: In the "PDF file format option" dialog box (page 85), select
[Generate one PDF file per xx page(s)]. If a scanned document
contains pages exceeding the specified page number, files are
named as follows:
Scan001.pdf, Scan002.pdf, Scan003.pdf...
Example 2: When files are saved in JPEG format, files are named as follows:
Scan001.jpg, Scan002.jpg, Scan003.jpg...
*The example names above are of files named using "Scan" as the file name.
*The number of digits is a number selected in the "File name format" dialog
box.