EasyManuals Logo

Fujitsu SP-1120N User Manual

Fujitsu SP-1120N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Scanner Setup
This section describes the software that is required for the computer you want to connect the scanner to, the system
requirements, and the scanner setup method.
The scanner setup procedure depends on the connection method of the scanner.
Check the reference page for each method to set up the scanner.
Connecting the Scanner via a Wired LAN (When Obtaining an IP Address Automatically) (page 22)
Connecting the Scanner via a Wired LAN (When Assigning an IP Address Manually) (page 25)
Connecting the Scanner to the Computer via the USB Cable (page 29)
When using Scanner Central Admin, refer to the Scanner Central Admin User's Guide.
Overview of the Bundled Software
This section describes the software that is required for the computer you want to connect the scanner to.
This product is bundled with the following software.
HINT
The software can be installed from the bundled Setup DVD-ROM or downloaded from the download site and
then installed.
PaperStream IP driver
The PaperStream IP driver is a scanner driver that conforms to the TWAIN/ISIS standard. It supports scanners
connected to a network.
There are three types of PaperStream IP drivers.
- PaperStream IP (TWAIN) for SP Series
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant 32-bit
applications.
- PaperStream IP (TWAIN x64) for SP Series
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant 64-bit
applications.
Regardless of your operating system, if the image scanning application that you are using is a 32-bit
application, use PaperStream IP (TWAIN) for SP Series.
- PaperStream IP (ISIS) for SP Series
Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant applications.
For details, refer to the PaperStream IP driver Help.
Network Setup Tool for SP Series
The following applications are included.
These applications are used to connect the scanner to a network to make the scanner available.
- Scanner Selection Tool
Use this application to set a computer to be able to use the scanner connected to a network.
- IP Address Setting Tool
Use this application to set a scanner's IP address and scanner name.
18

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SP-1120N and is the answer not in the manual?

Fujitsu SP-1120N Specifications

General IconGeneral
Optical Resolution600 x 600 dpi
Maximum Document SizeA4
Scan Speed (Color, A4, 300 dpi)20 ppm
Scan Speed (Mono, A4, 300 dpi)20 ppm
ADF Capacity50 sheets
InterfaceUSB 2.0
Scanning MethodCIS (Contact Image Sensor)
Color Depth24-bit
Grayscale Depth8-bit
Scanner TypeADF (Automatic Document Feeder)
Scanning Speed20 ppm (pages per minute)
Daily Duty Cycle3000 pages
Supported OSWindows
Dimensions298 x 135 x 133 mm

Related product manuals