Fujitsu SP-1120N User Manual

The Scanner Cannot Be Powered ON
Check the following points
● Is the power cable connected properly? (page 96)
● Did you press the power button on the scanner? (page 96)
If the problem still persists, check each item in Before You Contact the Scanner Service Provider (page
117) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
● Is the power cable connected properly?
Solution
Connect the power cable properly.
For details, refer to Getting Started.
● Did you press the power button on the scanner?
Solution
Press the power button on the scanner.
For details, refer to How to Turn the Power ON (page 31).
Troubleshooting
96

Fujitsu SP-1120N Specifications

General

Optical Resolution	600 x 600 dpi
Maximum Document Size	A4
Scan Speed (Color, A4, 300 dpi)	20 ppm
Scan Speed (Mono, A4, 300 dpi)	20 ppm
ADF Capacity	50 sheets
Interface	USB 2.0
Scanning Method	CIS (Contact Image Sensor)
Color Depth	24-bit
Grayscale Depth	8-bit
Scanner Type	ADF (Automatic Document Feeder)
Scanning Speed	20 ppm (pages per minute)
Daily Duty Cycle	3000 pages
Supported OS	Windows
Dimensions	298 x 135 x 133 mm