Fujitsu SP-1120N User Manual

Errors
● Error Indication
If an error occurs while the scanner is used, the indicators on the operator panel light up as follows.
● For temporary errors
The check indicator turns on or turns off.
The power indicator stays on.
● For device errors
The check indicator flashes.
The power indicator stays on.
Temporary errors can be recovered by the operator, whereas device errors may require troubleshooting by a
service engineer.
HINT
Error Recovery Guide is started up and the icon is displayed in the notification area located at the far right of
the task bar when you logged onto Windows.
When an error occurs on the scanner, the error name and code number is displayed in the Error Recovery
Guide window.
Take note of the displayed information and click the [More Info] button to check the troubleshooting
procedure.
Troubleshooting
89

Fujitsu SP-1120N Specifications

General

Optical Resolution	600 x 600 dpi
Maximum Document Size	A4
Scan Speed (Color, A4, 300 dpi)	20 ppm
Scan Speed (Mono, A4, 300 dpi)	20 ppm
ADF Capacity	50 sheets
Interface	USB 2.0
Scanning Method	CIS (Contact Image Sensor)
Color Depth	24-bit
Grayscale Depth	8-bit
Scanner Type	ADF (Automatic Document Feeder)
Scanning Speed	20 ppm (pages per minute)
Daily Duty Cycle	3000 pages
Supported OS	Windows
Dimensions	298 x 135 x 133 mm