EasyManuals Logo

Fujitsu SP-1120N User Manual

Fujitsu SP-1120N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Paper Size
When a mixed batch with different sizes is scanned, not feeding the documents straight may cause
troubles such as paper jams or part of the image to appear missing.
It is recommended that you check the scanned images if the documents were fed skewed.
ATTENTION
When a mixed batch with different sizes is scanned, documents are more likely to skew because the
side guides do not fit every sheet properly.
Combinations of Standard Paper Sizes in a Mixed Batch
Refer to the table below for a guideline of the range available for mixed batch scanning.
LTR:Letter size
*1: The following figure shows how to set the widest and the narrowest documents of the batch
between the side guides.
How to Load Documents
60

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SP-1120N and is the answer not in the manual?

Fujitsu SP-1120N Specifications

General IconGeneral
Optical Resolution600 x 600 dpi
Maximum Document SizeA4
Scan Speed (Color, A4, 300 dpi)20 ppm
Scan Speed (Mono, A4, 300 dpi)20 ppm
ADF Capacity50 sheets
InterfaceUSB 2.0
Scanning MethodCIS (Contact Image Sensor)
Color Depth24-bit
Grayscale Depth8-bit
Scanner TypeADF (Automatic Document Feeder)
Scanning Speed20 ppm (pages per minute)
Daily Duty Cycle3000 pages
Supported OSWindows
Dimensions298 x 135 x 133 mm

Related product manuals