Fujitsu SP-1120N User Manual

ATTENTION
Make sure that the cloth does not get caught and damage the document sensors.
Brake roller (× 2)
Remove the brake roller from the scanner.
For details about removing the brake roller, refer to Replacing the Roller Set (page 79).
Gently wipe dirt and dust off the roller, taking care not to damage the roller surface.
Pick roller (× 6)
Gently wipe dirt and dust off the roller as you rotate the roller manually, taking care not to damage the
roller surface. Make sure that it is wiped properly because black residue on the roller will affect the
feeding performance.
Plastic idler roller (× 4)
Gently wipe dirt and dust off the roller as you rotate the roller manually, taking care not to damage the
roller surface. Make sure that it is wiped properly because black residue on the roller will affect the
feeding performance.
Glass (× 2)
Gently wipe dirt and dust off the glass sections.
Daily Care
74

Fujitsu SP-1120N Specifications

General

Optical Resolution	600 x 600 dpi
Maximum Document Size	A4
Scan Speed (Color, A4, 300 dpi)	20 ppm
Scan Speed (Mono, A4, 300 dpi)	20 ppm
ADF Capacity	50 sheets
Interface	USB 2.0
Scanning Method	CIS (Contact Image Sensor)
Color Depth	24-bit
Grayscale Depth	8-bit
Scanner Type	ADF (Automatic Document Feeder)
Scanning Speed	20 ppm (pages per minute)
Daily Duty Cycle	3000 pages
Supported OS	Windows
Dimensions	298 x 135 x 133 mm