Fujitsu SP-1120N User Manual

c Press the scan/stop button on the operator panel for 2 seconds or more.
The feed/eject rollers rotate at the same time.
CAUTION
Be careful not to touch the rollers with your hand while they are
rotating.
d Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the surface
of the feed/eject roller, and wipe horizontally to clean dirt and dust off the whole surface.
Make sure that it is wiped properly because black residue on the roller will affect the feeding
performance.
4 Close the ADF.
For details, refer to How to Close the ADF (page 35).
CAUTION
Be careful not to get your fingers caught when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
Daily Care
76

Fujitsu SP-1120N Specifications

General

Optical Resolution	600 x 600 dpi
Maximum Document Size	A4
Scan Speed (Color, A4, 300 dpi)	20 ppm
Scan Speed (Mono, A4, 300 dpi)	20 ppm
ADF Capacity	50 sheets
Interface	USB 2.0
Scanning Method	CIS (Contact Image Sensor)
Color Depth	24-bit
Grayscale Depth	8-bit
Scanner Type	ADF (Automatic Document Feeder)
Scanning Speed	20 ppm (pages per minute)
Daily Duty Cycle	3000 pages
Supported OS	Windows
Dimensions	298 x 135 x 133 mm