Fujitsu SP-1120N User Manual

a Check the direction of the notch ( ) on the pick roller and of the small roller ( ), and insert
it in the hole.
b Close the sheet guide.
ATTENTION
Confirm that the pick roller is installed properly. Otherwise, paper jams or other feeding errors may occur.
9 Close the ADF.
For details, refer to How to Close the ADF (page 35).
CAUTION
Be careful not to get your fingers caught when closing the ADF.
10 Reset the roller set counter.
Replacing the Consumables
85

Fujitsu SP-1120N Specifications

General

Optical Resolution	600 x 600 dpi
Maximum Document Size	A4
Scan Speed (Color, A4, 300 dpi)	20 ppm
Scan Speed (Mono, A4, 300 dpi)	20 ppm
ADF Capacity	50 sheets
Interface	USB 2.0
Scanning Method	CIS (Contact Image Sensor)
Color Depth	24-bit
Grayscale Depth	8-bit
Scanner Type	ADF (Automatic Document Feeder)
Scanning Speed	20 ppm (pages per minute)
Daily Duty Cycle	3000 pages
Supported OS	Windows
Dimensions	298 x 135 x 133 mm