Fujitsu Stylistic ST5000 Series - Boot Menu Options

BIOS Setup Utility 24
Boot Menu Options 2
Boot menu options are described in Table 2-15.
Table 2-15. BIOS Setup Boot Menu Options
Option Settings Description
QuickBoot Disabled
Enabled
Determines whether the full set of tests are run during the
Power-On Self Test (POST).
When [Enabled] is selected, a less extensive memory test is
performed and the size of installed memory is not displayed
during the memory test.
When [Disabled] is selected, the full set of tests is run.
Boot Time Diagnostic Screen Disabled
Enabled
Determines whether status messages are displayed as the
Power On Self Test (POST) is performed.
Select [Enabled] to display messages.
If [Disabled] is selected, messages are not displayed and the
logo screen is displayed. (If POST errors occur, POST
messages are displayed regardless of this setting.)
Preboot Execution
Environment
Disabled
Enabled
Determines whether to boot up from a network server.
Select [Enabled] to allow the system to boot from a network
server (Preboot Execution Environment).
If [Disabled] is selected, this feature is disabled.
Boot Device Priority Submenu Select this submenu to configure the order in which drives
are searched for a bootable image.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
Item Specific Help
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
Quick Boot: [Enabled]
Boot Time Diagnostic Screen: [Disabled]
Preboot Execution Environment: [Disabled]
Boot Device Priority
▲
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Boot Info Exit