BIOS Setup Utility 25
Boot Device Priority Submenu 2
Table 2-16. describes settings in the Boot Device Priority submenu.
Table 2-16. BIOS Setup Boot Sequence Submenu
Setting Description
Floppy Disk Drive
+Hard Disk Drive
Optical Media Drive
Determines the order in which the system searches drives for a bootable image.
Tap on an item which appears below another to move it up in the list to change the boot
sequence. (e.g., in the example above, to move Hard Disk Drive down, you must tap
Optical Media Drive to move it above Hard Disk Drive.)
If you click on the pen barrel button while tapping an item, the item will move down the
list.
If there is a “+” next to an item, tap the item then press the [Ent] key to expand the list.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
Item Specific Help
Floppy Disk Drive
+Hard Disk Drive
Optical Media Drive
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Boot Device Priority
Exit Submenu
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
To Next Page
Loading...
Need help?
General