Fujitsu T936 - Installing the Software after the Recovery Image Is Restored

Appendix
Installing the Software after the Recovery Image is Restored
Note: The following steps are ne eded only if you restore the image from th e
DVD Recovery Disc Se t that y ou purchased.
Installation of essential access software
1. Insert the bootable disc i n your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.
3. You can now connect to the Int ernet and download FSDM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloa ded yet.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Manager) from the support site and dow nload all
the drivers applicable to the model and OS using FSDM if they are not downloaded ye t.
2. W hen the software packages are downloaded from the web, it is important to
download the Auto Installer Software package a nd the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder
and Re adme file in the same location as other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on th e User Account Control dialog box. This will take some time to
process the software packages. A m essage w ill be displayed during this time
stating Please wait while the content is being processed.
6. If the E U LA is displayed for the Fujitsu Software Auto Installer, accept
the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the a bility
to auto install the software downloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select Al l, to install the softw are in th e order l isted.
9. Click the Install button to s tar t the in stallatio n.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. The You must restart the system for th e settings to take effect. Do you wish to
reboot now? message appears. Select Ye s.
12. The system will now reboot.
Fujitsu 113