Fujitsu T936 User Manual

Tro ubl eshooting and tips
The LCD screen of the notebook is difficult to read
LCDscreenLCD screen
Cause Troubleshooting
Reflected glare ► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
The external monitor rem
ains blank
Monitor
Cause Troubleshooting
Monitor is sw itched off. ► Switch the external monitor on.
Power saving has been activated (monitor is
blank).
► Press any key to continue.
Brightness is set t o dark.
► Adjust the brightne
ss of the monitor.
Screen output is set to the no tebook’s LCD
screen
► Press the key combination for chang ing over
the screen output, see "
Key co mbinatio ns",
Page 41.
The external monitor’s AC cable or data cable is
not connected properly.
► Switch off the external monitor and the
notebook.
► Check whether the AC cable is plugged
properly into the externa l monitor a nd into
the power outlet.
► Check whether the data cable is properly
connected to the notebook and the external
monitor ( if it is plugged in with a conn ector).
► Switch on the external monitor and the
notebook.
The extern
al monitor is blank or the image is unstable
MonitorMonito r
Cause Troublesh
ooting
The wrong
external monitor has been selected
or the wro
ng screen resolution ha s been set for
the appl
ication p ro gram.
► Terminat
e the application program under
Windows b
y pressing
Alt
+
F4
.Ifthe
error pe
rsists after terminating the p rogram,
use the k
ey combination for switching the
screen
output (see "
Key combinations",
Page 41),
in order to switch to the LCD
screen
of the notebook.
Change
the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Sele
ct monitor: Select monitor 1 or 2 as
desc
ribed in the documenta tion for your
ope
rating system.
Fujitsu 81

Fujitsu T936 Specifications

General

Brand	Fujitsu
Model	T936
Category	Laptop
Language	English