Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated. ► Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the C ontrol Panel, see "
Adjust ing the
stylus", Page 34 and "Calibrating the stylus",
Page 34.
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install th e driver
for th e standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook d
oes not start after switching it on
Notebook
Cause Troubleshooti
ng
The battery is
not installed corre ctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC a dapter to the notebook.
The A C adapt er is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
82 Fujitsu
To Next Page
Loading...
