Security functions
Brief overview o f the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "
http://www.fujitsu.com/us/su pport/".
Security function Type of protection
Preparation
Security Lock
Mechanical Fit and lock the Kensingto
n
Lock Cable (accessory).
Fingerprint sensor (device
dependent)
Biometric
Install the sup plied fingerprint
software.
BIOS password protection Password protection for
the BIO S Setup, operating
system and hard disk with
supervisor and user passwo rd.
The passwords consist of a
maximum of eight alphanumeric
characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
Boot from Removab
le Media
Prevents unauthorized booting
of an operating system from
external media (e.g. U SB stick,
USB CD-ROM drive, etc.).
In the BIOS Setup,
go to the
Security m enu and
edit the Boot
from Removable M
edia optio n.
Owner Informa
tion
Display service desk or owner
information during the boot
process.
In the BIOS Set
up,gotothe
Security menu
and edit the
Owner Inform
ation option.
SmartCard reader (device
dependent)
PIN and SmartCard protection
for the operating system
To use t he SmartCard reader
functions, install the supplied
(or other suitable) software.
Trusted Platform Module
(device dependent)
Identification and authentication
of t he notebook
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
Fujitsu 63
To Next Page
Loading...
