Fujitsu T936 - Using the Security Function of the Tablet Buttons; Assigning the Supervisor Password; Assigning the User Password; Entering Passwords Via the Tablet Buttons

Security functions
Using the security function of the tablet buttons
If you have allotted a supervisor and/or user password in the form o f tablet button combinations as
described below, you can use the tablet buttons to enter this when you start your device.
Assigning the supervisor p
assword
► Select Start - Run.
► Enter the following info
rmation in the prompt: C:\Program Files\Fujitsu\Security
Panel Application\Sup
ervisor\FJSECS.EXE.
► Confirm with
Enter
.
► Follow the instructio
ns on the screen.
Assigning the user password
► Select Start - All Programs.
► Select Security Panel Application - Sec urity Pan el Application.
► Follow the instructions on the screen.
Entering passwords via the tablet buttons
The passwords for entry via the tablet buttons usually consist of a combination of buttons,
e.g. button
2
+ button
3
, followed by button
1
and button
ENT
.
► Enter your password using buttons
1
to
4
.
► Confirm with
ENT
.

The de vice will be unlocked.
68 Fujitsu